• 1986 Kawasaki Kdx 80 Parts CHEAP — Vintage Kawasaki TRADER PAGE....what you got to Sale

    Selling all the parts pictured with more coming as they get pulled off and cleaned. Prices are below and obo if you want more than one.

    Full oem exhaust $30

    Cylinder Jug $25

    Head $10

    Kick starter $15

    Shifter $10

    Reed and carb intake boot $15

    Clutch cover $10

    Air cleaner box $10

    Crossposted

    1986 Kawasaki Kdx 80 Parts CHEAP

    $1 - Springfield, IL

    Selling all the parts pictured with more coming as they get pulled off and cleaned. Prices are below and obo if you want more than one.

    Full oem exhaust $30

    Cylinder Jug $25

    Head $10

    Kick starter $15

    Shifter $10

    Reed and carb intake boot $15

    Clutch cover $10

    Air cleaner box $10

    Crossposted

    0 comments

    z650 — Vintage Kawasaki TRADER PAGE....what you got to Sale

    I'm selling my z650 as an unfinished project

    She runs well

    Dyna s ignition

    Harris pipe

    Pod filters (I do have the original air box, rubbers and jets)

    There's a few things need finishing like

    Chain guard fitting

    Indicators fitting

    New battery (starts of the kick start)

    Petrol tap seal kit fitting

    I have all the parts to finish it but I have found another bike and need a quick sale

    £1500ovno

    I'm selling my z650 as an unfinished project

    She runs well

    Dyna s ignition

    Harris pipe

    Pod filters (I do have the original air box, rubbers and jets)

    There's a few things need finishing like

    Chain guard fitting

    Indicators fitting

    New battery (starts of the kick start)

    Petrol tap seal kit fitting

    I have all the parts to finish it but I have found another bike and need a quick sale

    £1500ovno

    0 comments

    kawasaki z1100 REDUCED PRICE — Vintage Kawasaki TRADER PAGE....what you got to Sale

    For sale/swap

    My Kawasaki z1100 shaft

    10 months mot

    Runs and rides very well with lots of power

    This is a 35 year old bike so she does have wear and tear

    The rocker cover gasket has a bit of a leak

    There's a small rip in the seat that has been glued

    The paint on the tank isn't the best

    Running iridium plugs

    No advisarys on the last mot

    New clutch cable

    New battery

    She's a ready to ride bike and starts on the button without fail every time, everything works as it should

    Please don't come and pick a million faults with it and offer me £500 as you'll be wasting your time and mine, as I said she's 35 years old and never been restored so she's not mint but mechanically sound and ready to ride away

    May swap for a gsxr750/1100 or enduro bike

    Or something different try me

    The price is £1500ono I am open to negotiation or part exchange

    Just one final time for good luck

    SHES 35 YEARS OLD AND READY TO RIDE BUT NOT!! MINT BUT MECHANICALLY SOUND

    0 comments

    z1100 — Vintage Kawasaki TRADER PAGE....what you got to Sale

    For sale/swap

    My Kawasaki z1100 shaft

    10 months mot

    Runs and rides very well with lots of power

    This is a 35 year old bike so she does have wear and tear

    The rocker cover gasket has a bit of a leak

    There's a small rip in the seat that has been glued

    The paint on the tank isn't the best

    Running iridium plugs

    No advisarys on the last mot

    New clutch cable

    New battery

    She's a ready to ride bike and starts on the button without fail every time, everything works as it should

    Please don't come and pick a million faults with it and offer me £500 as you'll be wasting your time and mine, as I said she's 35 years old and never been restored so she's not mint but mechanically sound and ready to ride away

    May swap for a gsxr750/1100 or enduro bike

    Or something different try me

    The price is £1800ono I am open to negotiation or part exchange

    Just one final time for good luck

    SHES 35 YEARS OLD AND READY TO RIDE BUT NOT!! MINT BUT MECHANICALLY SOUND

    1 comments

    1973 H2 restored purple — Vintage Kawasaki TRADER PAGE....what you got to Sale

    This was a garage find 10 years ago. It had been stored for 15 years previous. I am fourth owner. Bike has all original equipment. Never modified. Engine never apart. Four years ago I disassembled the H2 and repainted the frame, swing arm, and black parts. New fork seals, sprockets & chain, carbs cleaned. New purple paint & decals by Randy Sams, a well known in Kansas City Japanese bike collector and painter. We used "Vintage Kawasaki" paint set. Seat, wiring, turn signals, hand grips, plastic parts are all original. Original exhaust & baffles. Owners manual included but no tool kit. All triple guys who see the bike are impressed. You will be too. $12,000 cash. Call Chris at 913-269-3722

    1 comments

    Front Spokes — Vintage Kawasaki TRADER PAGE....what you got to Sale

    I have an assortment of NOS front spokes, if anyone is in need.

    (NOT a complete set, unfortunately!)

    I Have:

    19 pcs, front outer spokes (part #41028-084)

    10 pcs front inner spokes (part #41027-085) @ 11 pcs nipples.

    They fit should fit most KZ 650, 900, & 1000

    (Check partzilla for your application!)

    Still in original packaging, can only assume they were pulled from

    at the parts counter or a shop...Any reasonable offer accepted. Thanx!

    Front Spokes

    £12,345 - Greenville, OH (45331)

    I have an assortment of NOS front spokes, if anyone is in need.

    (NOT a complete set, unfortunately!)

    I Have:

    19 pcs, front outer spokes (part #41028-084)

    10 pcs front inner spokes (part #41027-085) @ 11 pcs nipples.

    They fit should fit most KZ 650, 900, & 1000

    (Check partzilla for your application!)

    Still in original packaging, can only assume they were pulled from

    at the parts counter or a shop...Any reasonable offer accepted. Thanx!

    0 comments

    Progressive Suspension Rear Shocks and Springs, KZ1000 KZ900 Z1 — Vintage Kawasaki TRADER PAGE....what you got to Sale

    Very nice pair of lightly used Progressive 12-1207B 12 Series shocks and 03-1367B springs. These will fit all Kawasaki 900/1000 1973-1980 plus many others. Includes extra bushings, washers, instructions and shock wrench. They should clean up very nicely! Asking $125 USD plus shipping from Painesville, OH 44077.

    Please feel free to ask any questions or for additional photos. Thanks for looking!

    Fits: Kawasaki GPZ550 (80-81)- KZ550A (80-83)- GPZ750 (82)- KZ750E (80-83)- KZ750H (80-83)- KZ900 (76-77)- Z1 (73-75)- Z1R (78-80)- KZ1000 (77-83)- GPZ1100 (81-82)- KZ1100 Shaft (81-83).

    Gas charged

    Non-adjustable damping

    Five position cam style preload adjuster

    0 comments

    1983 KZ750 Spectre PROJECT — Vintage Kawasaki TRADER PAGE....what you got to Sale

    $400 USD OBO and open to trades.

    Located in Marion, IN

    Details:

    Not ready to ride.

    I have the tile.

    Bike is mostly, if not all, stock parts. Still have all emblems I bought it with which are the tank Kawasaki emblem and the side cover Spectre750 emblems.

    I bought this bike in August and it was wrecked a month later when a guy pulled out in front of me in his truck.

    The engine wasn't damaged in the accident as far as I know. It ran after jumping the battery in January.

    There is a crack in the front of the frame that can be welded.

    I'm not a mechanic so I can't give you technical terms or detailed info on what needs fixed but I this is what I do know:

    Speedometer is busted up

    Brakes

    Rear break foot lever is stuck

    Mirrors

    Couple tears in the seat

    Turn signals

    Center stand is wrapped around pipe

    Snap in front of frame

    I don't have a garage so it has been outside under a bike cover. I started to work on it last fall but stopped when it got too cold and I don't have the room, time, experience, or funds to fix it up like I want to. It's available to look at through the week or weekend. Serious inquiries only please and no, I'm not parting it out so unless you offer me a ridiculous amount for them, I won't only sell the Spectre750 emblems by themselves. I want to keep the bike together as much as possible.

    3 comments

    Photos from Dan Sullivan's post — Vintage Kawasaki TRADER PAGE....what you got to Sale

    Here's my new ride- 1978 Kawasaki Z1R. I know it's not as cool as a Z1R t/c but the nearly 20k difference helps easy the pain. It's nicely built with a 1105 kit and flowed head, 29 smoothbores and a old Star header. I know some will make fun of the paint job but believe me there is a beast lurking in there. I bought it from a good guy going through a hard time and it was hard to see the tear in his eye as his trusty steed for 30 years was leaving the garage( please say a prayer for Dave). I can't wait until it warms up so me and the "Warewolf of London" can get out and howl at the moon! There nothing quite like the howl of a Kaw on warm summer night. Dave was wise enough to keep all the stock parts to return it to original but I may just enjoy the period correct way it is for a while less the low hanging Star header. Anyone interested in a good drag header? Welcome home Wolfee!

    20 comments

    Period 4 into 1 exhaust for Kaw 900-1000 by RB Racing Los Angeles Ca. Nice shape. In Calif. CONUS — Vintage Kawasaki TRADER PAGE....what you got to Sale

    300.00 USD plus shipping to your location in the US only. (sorry)

    This exhaust is no longer made but the company is still in business in Calif .

    I called them several years ago when i bought it and they explained why their exhaust was superior to Kerker etc.

    Inside there is light rust but can be cleaned and used. the baffle needs repack as it had a nest of feathers inside.

    No scrapes or gouges.

    Additional pictures by request. this is a heavy gauge steel so shipping likely not cheap .

    As in all used parts, no warranty or returns.

    Tri750@hotmail.com Paypal ok

    1 comments

    KZ1000R KZ1100R ELR Fairing bracket kit GPz750 GPz110 — Vintage Kawasaki TRADER PAGE....what you got to Sale

    Full mounting kit $274.83 USD via Pay Pal, kit includes,

    1--11036-1349 BRACKET-A,COWLING,LH,

    1--11036-1350 BRACKET-A,COWLING,RH,

    2--11036-1439 BRACKET-A,COWLING

    3--92015-1025 NUT,5M/M

    4--92015-1150 NUT,5MM

    1--11036-1354 BRACKET-A,HEAD LAMP,B

    1--11036-1355 BRACKET-A,HEAD LAMP,B (these come with 112B0614 BOLT-UPSET 6X14)

    Individual pieces are available on a limited basis, please contact me via PM for prices.

    FREE CONUS SHIPPING

    INTERNATIONAL BUYERS PLEASE CONTACT ME FOR SHIPPING QUOTE!!

    12 comments

    1981 kz650 part out — Vintage Kawasaki TRADER PAGE....what you got to Sale

    I have the full bike minus the motor up for part out with also 2 boxes full of spare parts along with a whole separate rear end and also a spare front wheel. Have clean title in hand willing to sell as a whole or part by part.

    1981 kz650 part out

    $1 - York, PA (17404)

    I have the full bike minus the motor up for part out with also 2 boxes full of spare parts along with a whole separate rear end and also a spare front wheel. Have clean title in hand willing to sell as a whole or part by part.

    4 comments

    1973-1980 Z1 & KZ oil pans and valve covers

    Pick your finish! Polished or powder; never painted. Valve covers not shown. Can ship anywhere from Cleveland OH. Paypal OK.

    1973-1980 Z1 & KZ oil pans and valve covers

    £70 - Cleveland, OH (44124)

    Pick your finish! Polished or powder; never painted. Valve covers not shown. Can ship anywhere from Cleveland OH. Paypal OK.

    5 comments

    Origional 1970 H1 — Vintage Kawasaki TRADER PAGE....what you got to Sale

    This origional H1 is for sale.

    I've owned it for almost 35 years.

    Almost alll complete, has strong compression, transmission/ clutch I haven't started for over 10 years but it has always been garaged and covered.

    Only serious inquire PM me

    Asking 6k American thanks,

    Dan

    I WILL SELL THIS BIKE FOR LESS!!!!

    PLEASE MAKE OFFER!!!!#

    Origional 1970 H1

    £6,000 - Visalia, CA (93277)

    This origional H1 is for sale.

    I've owned it for almost 35 years.

    Almost alll complete, has strong compression, transmission/ clutch I haven't started for over 10 years but it has always been garaged and covered.

    Only serious inquire PM me

    Asking 6k American thanks,

    Dan

    I WILL SELL THIS BIKE FOR LESS!!!!

    PLEASE MAKE OFFER!!!!#

    10 comments

    1975 kawaski 175 — Vintage Kawasaki TRADER PAGE....what you got to Sale

    I have up for sale a 1975 kawaski 175. It runs but will need cleaned up a bit. It has no title. I can give u a bill of sale. it comes with another seat that may need recovered. Tires hold air but are weather checked. Possible delivery for more information please call or text chris at 308-230-0743. i cant answer questions because he knows more about them. Thanks

    0 comments

    1985 NINJA 900 — Vintage Kawasaki TRADER PAGE....what you got to Sale

    1985 ZX 900 NINJA, Nice Shape, Only 21,719 K's, Runs Good, F1R Exhaust, $2200 ....2 Other '85 Parts Bikes Also Available, Call 807-709-8466

    1985 NINJA 900

    £2,200 - Thunder Bay, Ontario

    1985 ZX 900 NINJA, Nice Shape, Only 21,719 K's, Runs Good, F1R Exhaust, $2200 ....2 Other '85 Parts Bikes Also Available, Call 807-709-8466

    1 comments

    1979 1/2 KZ1300 6 Cylinder Engine — Vintage Kawasaki TRADER PAGE....what you got to Sale

    Wanting to Trade My Kawasaki 1980 KZ1300 for a VW Trike or Cash

    The Engine has Been Rebuilt From The Block Up With New Rings and Gaskets All The Parts That Gave The KZ1300 Problems From the Factory Has Been Replaced With Better And More Dependable Parts The Fuel Valve ,The Timing chain Adjuster ,The Stock Ignition Coils ,The Stock Exhaust System.The Timing chain Adjuster Has Been Replaced With a APE CNC Aluminum Manual Adjuster ,The Ignition Coils Were Replaced With Nology 45,000 Volt Hi-Performance coils and Nology Silver Core Hi-Performance Sparkplugs and 8mm Sparkplug Wires and New Caps,There Is a 6 Into 1 Exhaust Header On it And a Awesome Exhaust Sound,The Fuel Valve Was Removed and a Kawasaki Vacuum Pulse Fuel Pump Was Added To Prevent Vapor Lock on Real Hot Days Do to High Engine Temps ,Carburetors Were Rebuilt With New Rebuild Kits Real Decent Tires,Lots of Chrome And Spare Parts ,The Clutch and Rear End is in Good Shape , New Matching Ignition Switch and Seat Master Electric Switch so One Key Fits All,This Machine From the Factory Boast 120 hp at The Rear Wheel and With This Big 6 Cylinder Engine Was Supposed to Get 40 Miles to the Gallon From the Factory, The Fuel Tank Had 2 Pinholes where the Previous Owner Removed the Badges on Both Sides but Ground Down too Far Doing the Bodywork Which Resulted In a Blister on Both Sides of the Tank I Had the Tank Coated in the Inside to Seal it.The Paint is in Decent Shape on the Machine.There is a Few Minor Things to do on the Machine But All the Major Stuff Has Been Addressed This Bike is Very Fast Not For The Weak Hearted ijs .Do to Present Health Conditions Can't Ride it Right Now, Would Like to Trade For a Volkswagen Trike Not Looking For a Junker Either. And Scammers Don't Waste Your Time ,Cash or Trade Only, Buyers from out of the city will be responsible for pickup and or shipping no exception $4000.00 will add photos shortly

    0 comments