New member bought rough h1 doing few mods. Whats handiest usd front fork swap

New member bought rough h1 doing few mods. Whats handiest usd front fork swap?

10 comments
  • Cheers man. Will they bolt straight on. Is speedo drive same?

  • Great

  • 7 speedo drive will work, the H uses a smaller spindle. Clock uses same gearing though. 7 yokes need a little work - press out 7 stem and get spacers to press in h stem. Few online guides to it if you Google.

  • Cheers I check it out. Thanks for your help.

  • No worries. H stem is very long and slender, so direct bolt in isn't an option, but any good machine shop can sort it with the P front end. Just don't use 7r calipers. The 6 pots are rubbish. Bandit 1200 4 pots are bolt on to 7 forks and much better.

  • Shopping list gets longer lol

  • If you're careful you can get the parts for about 150-200 gbp and the spacers and pressing done for about 50.

  • If you're careful you can get the parts for about 150-200 gbp and the spacers and pressing done for about 50.

  • Well worth it. Have press and lathe should b fit to do spacers. Front end swap lick of paint shes ready for summerB-)

  • Standard 7 front makes a big difference. ;)