• HELP PLEASE — Kawasaki ZX-7R Ninja

    HELP PLEASE!!

    We had a good few days here in Mid Michigan, so I got the 7r out. I have discovered some issues and would like to know if anyone has any idea what is causing them.

    What is happening is I cant get the bike up over 65 really, its jerky, kinda sputtery, and after 2nd gear there is like 0 throttle response, even with it wide open. It doesnt climb, and almost bogs down, but idles fine and it revs fine if I just have it sitting there.

    So first gear is fine, I get an occasional sputter or flat spot

    second gear is the same as first except for when I get it over 45. It gets real sputtery and jerky. Its just not smooth at all.

    third gear i can hold maybe at around 65. I pushed it to 75 but it barley got there and didnt stay for long.

    forth and fifth gear wont even go above 50, its just so boggy.

    I thought maybe it wasnt getting enough fuel so I changed the fuel filter, put a fresh tank of 93 in it with an additive.

    Before I take the carbs off and clean the carbs, are there any other suggestions? I was thinking maybe a fuel pump?

    any help is appreciated!

    6 comments

    98 ZX7R 13,600 Miles Clean Title — Kawasaki ZX-7R Ninja

    Tires are fair plastics are newer clutch master and slave cylinder rebuilt and replaced 2k ago front caliper rebuilt about 1k ago new pads then carbs could use a sync possibly runs a little rich fork seals need replaced they will come with it along with some parts and the old plastics but they are beat up 2500 obo might trade for banshee only trying to make room for a new bike hate to sell it love this bike but too many toys

    0 comments

    Zx7r parts blowout — Kawasaki ZX-7R Ninja

    Message me for a price you will be happy with. I have tons of stuff. Need to get a new truck so selling a ton of extra parts. Gaskets are all new and have most every seal and gasket case up and also have the side and oil pan gaskets. Located in Florida and can ship anywhere on you're dime.

    1 comments

    Hi guys — Kawasaki ZX-7R Ninja

    Hi guys

    Has any1 tried fitting the gsxr1000 k5 swingarm onto the zx7r?

    I have a mate that has loads of k5 parts would be a lot cheaper getting from him as he is local where as import freight and import duty would be a killer.

    0 comments

    Zx7r — Kawasaki ZX-7R Ninja

    Bonsoir

    Je vend mon zx7r de 1999

    57000 kms

    Débridé

    Excellent état

    Pneus 40 % usures

    Jantes peintes

    Durit avia

    Dosseret

    Pot mig homologué

    Factures et carnet entretien depuis son achat neuf

    Je ferais la révision avant la vente.

    Pour plus d infos contacter en MP

    Curieux s abstenir.

    0 comments

    I recently got a 93 ninja zx7 I ve heard you can replace the stock shock with... — Kawasaki ZX-7R Ninja

    I recently got a 93 ninja zx7. I've heard you can replace the stock shock with a zx10 or zx12 shock. I bought a zx12 shock but it won't fit through the hole in the swingarm becauseof the reservoir. Anyone else done a rear shock upgrade? Was I supposed to use the zx12 swingarm as well or can I safely widen the hole in my stock swingarm to make it fit? By the way, first bike so excuse me if I sound ignorant.

    7 comments

    Ok so bike ZX7R 1997 P2 died just before christmas I tucked her up for the... — Kawasaki ZX-7R Ninja

    Ok, so bike (ZX7R 1997 P2) died just before christmas..... I tucked her up for the worst of the winter.

    Today it turns out she has just munched the new fuel pump relay i fitted last summer.

    Has anyone else had this issue?

    Could it be a wiring problem on the bike?

    Are there any know faults for this in ZX7R?

    or should I be asking for a replacement of refund?

    4 comments

    1999 KAWASAKI ZX7r — Kawasaki ZX-7R Ninja

    1999 ZX7R

    28000 miles

    Mot till March

    Recent Oil & Filter

    Wavy Discs

    New Screen

    Tail Tidy

    Carbon Rear Hugger

    Nissin Caliper Conversion

    New Front HH pads

    LED Taillight

    Short Levers

    Rear Seat Cover

    Alcantara Seat Covers

    1999 KAWASAKI ZX7r

    £1,500 - Milton Keynes

    1999 ZX7R

    28000 miles

    Mot till March

    Recent Oil & Filter

    Wavy Discs

    New Screen

    Tail Tidy

    Carbon Rear Hugger

    Nissin Caliper Conversion

    New Front HH pads

    LED Taillight

    Short Levers

    Rear Seat Cover

    Alcantara Seat Covers

    6 comments

    Moin — Kawasaki ZX-7R Ninja

    Moin ...

    Suche einen neuen Endtopf für meine ZX-7R . Wer hat Vorschläge, Ratschläge oder noch einen rumliegen ?

    Bin für alles dankbar! Lg

    6 comments

    99 Zx7r — Kawasaki ZX-7R Ninja

    For sale ($2500) or trade for a car. 99 zx7r new chain, fr &rear wheel bearings changed, carbs cleaned, new taillight w integrated sigs, fork oil seals done in august 2016, new engine oil (Amsoil 10w40 4t full syn) n plugs (ngk cr9ek), new ignition key switch (oem), new rear tire. Comes with extra set of tail fairings and any other parts i have for it. Needs new windshield. Motor has a little over 9k on it. I need a car or cash $2500 obo.

    5 comments

    Hello dears Would u be so kind please Could somebody reply for my questions... — Kawasaki ZX-7R Ninja

    Hello, dears! Would u be so kind, please. Could somebody reply for my questions, please? Or, maybe, send here a few pictures with comments. Or provide right web-links, pls. And I'll read this. Thank you very much. I'm not from UK/USA. But trying to understand those parts above. To grow up my skills.

    1) The question about Kawasaki ZX-7 (ZX750-H2) 1990: "Suspension... Swing arm pivot ball bearing ...works racer type construction..." © What does it mean: works racer type construction?

    Quotes in English language. But this document was made in Japan, in middle of 1995 year.

    0 comments

    Zx10r Front & Rear ends + Zx7r frame.. — Kawasaki ZX-7R Ninja

    2005 Zx10r Front & Rear end with Zx7r fitting kits...

    Front forks, yokes, spindle, race clip ons, R6 calipers, wheel with captive spacers

    Swingarm, Shock, caliper, wheel with captive spacers

    All in immaculate condition & bolts straight into a Zx7r...

    Also available as a rolling chassis with v5 in brushed alloy finish for that Factory look..

    0 comments

    Zx10r Front & Rear end + Zx7r frame — Kawasaki ZX-7R Ninja

    2005 Zx10r Front & Rear end with Zx7r fitting kits...

    Front forks, yokes, spindle, race clip ons, R6 calipers, wheel with captive spacers

    Swingarm, Shock, caliper, wheel with captive spacers

    All in immaculate condition & bolts straight into a Zx7r...

    Zx7r frame with v5 in brushed alloy finish for that Factory look slso available...

    0 comments

    Zx7/9r Frame, BRG engine kit, 9rB motor — Kawasaki ZX-7R Ninja

    OK just putting it out there...

    Due the arrival of an M RR frame this may be for sale....

    02 Zx7r lightened frame with V5, race subframe, ZXR J swingarm all powder coated satin black.. Immaculate...

    BRG complete 9r engine conversion kit.. New

    Zx9r B motor 20k with carbs & wiring loom...

    Please pm me if Genuinely interested..

    No money Don't bother me....

    0 comments

    parts — Kawasaki ZX-7R Ninja

    1995 Kawasaki ZX7R, one owner with 25k miles with CD Title. Engine still started after crash.

    Frames neck and forks absorbed the majority of the impact. Bike can be rebuilt with donor frame.

    Many good and useable parts plus some nice aftermarket parts too.

    Posting for a buddy.

    (786) 372-5488

    Shawn.

    Miami, FL.

    1995 Kawasaki ZX7R, one owner with 25k miles with CD Title. Engine still started after crash.

    Frames neck and forks absorbed the majority of the impact. Bike can be rebuilt with donor frame.

    Many good and useable parts plus some nice aftermarket parts too.

    Posting for a buddy.

    (786) 372-5488

    Shawn.

    Miami, FL.

    6 comments

    1994 Zx7 — Kawasaki ZX-7R Ninja

    New tires only 70 miles on them new throttle cables I have brand new side fairings in box rebuilt carbs new air filter runs good the bad is it need a valve cover gasket asking $1500 firm no offers or trades I'm taking a loss on this my loss your gain serious let me know

    1994 Zx7

    $1,500 - Denver, CO (80233)

    New tires only 70 miles on them new throttle cables I have brand new side fairings in box rebuilt carbs new air filter runs good the bad is it need a valve cover gasket asking $1500 firm no offers or trades I'm taking a loss on this my loss your gain serious let me know

    0 comments

    Photos from Michael Ziraschi's post — Kawasaki ZX-7R Ninja

    ZXR M Model - Need a set of intake boots

    Hey guys, anyone have a set of stock intake boots (the ones on TOP of the flatslides between the carb inlet and the stock airbox, not the manifold side between the carb and the motor)

    Close to having an M I picked up back on the road. But when removing the stock airbox...one of the boots was brittle and broke. I have a set of CV boots if anyone wants to trade (won't fit the flatslides obviously) or if someone has a set sitting around for use with a stock M airbox, please give me a shout.

    Can easily pay by paypal. Cheers.

    0 comments

    Kawasaki zx7r P2 — Kawasaki ZX-7R Ninja

    Selling for a friend

    Only 17000 miles

    HE ZX7R ONLY BECAUSE HE CANT RIDE THE BIKE ANYMORE DUE TO BACK PROBLEMS.THE OILS AND PLUGS ARE ALL DONE BY HIM EVERY YEAR REGARDLESS OF TIME AND MILES. HE HAS JUST CHANGED THE PLUGS . FORK SEALS DONE LAST YEAR AND NEW DIABLO TYRES FITTED 2014 AND THEY HAVE LOADS OF LIFE LEFT ON THEM. THE BIKE RUNS FAULTLESS AND HAS DONE SINCE HES KNOWN IT WHICH IS YEAR 2000. HE GOT THE BIKE OFF A FRIEND IN 2012 AND LOVED IT EVER SINCE.THE BIKE HAS A FEW SMALL MARKS ON IT INCLUDING A SCRATCH ON THE TANK.IT ALSO HAS A 2" CRACK ON THE FRONT FAIRING.

    HE NEEDS A SIT UP BIKE SO WOULD CONSIDER A XT660X IF YOU FANCY A SWAP

    HE WILL PUT 12 MONTHS MOT ON THE BIKE IF BUYER WANTS BUT WILL HAVE TO GIVE ME A FEW DAYS TO DO SO.

    OFFERS CONSIDERED BUT NO STUPID ONES.

    0 comments

    Photos from Micheal MacDonald's post — Kawasaki ZX-7R Ninja

    Hi guys

    If any of u have ur carbs off please could u measure the depth or height of the black plastic tops that fit over the diaphragm, I saw a pic of a set of carbs and my black caps look alot narrower, could have been the angle of the pic but just want to make sure.

    Thanks

    13 comments

    Zx7r — Kawasaki ZX-7R Ninja

    Salut a tous jai récupérer un zx7r P avec le moteur hs je cherche un bloc complet si quelqu'un a ca a vendre venez en MP

    Moteur de 96 a 2003

    0 comments

    Hi i got a ZxR 750 J2 92 i try to setup a jet kit — Kawasaki ZX-7R Ninja

    Hi, i got a ZxR 750 J2 92, i try to setup a jet kit.

    The original jets are different for the 2 cylinders inside because someone explained to me that they run hotter.

    Now i got a jet kit and all the jets are the same for the 4 carbs.

    So the question is why the original stock jets are different and the jets from a kit are all 4 the same ?

    29 comments

    Patrick Cullen shared Pats Bikes and Motorcycle Parts's album to the group: Kawasaki ZX-7R Ninja. — Kawasaki ZX-7R Ninja

    This is an album full of parts for a 96 - 03 Kawasaki ZX7, they were removed from a 98 model. We recently parted this bike out so if there is anything you dont see in the pictures that you are looking for please let us know. There is a price list at the end of the album. Worldwide shipping is available. We are located in South Florida.

    1 comments