• Photos from David Copeland Jr.'s post — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Between Youngstown and Cleveland Ohio

    Finned engine covers $300

    New Café/bullet fairing/hardware $125

    Mac 4 into 2 chrome pipes. Very Nice! $250

    1976 - 1980 900ltd/1000ltd oem pipes Very Nice! $250

    Brand new Lockhart fork brace 1973 - 1980 $70

    Complete Carb Rebuild kits 1976 - 1980 $80

    Brand New kz900 z1 kz1000 seat 1973 - 1980 $200

    Used aluminum kz900 kz1000 engine covers $25 set

    3" Extended kz900 kz1000 swingarm for disk brake $125

    I will sell these items or possibly trade for other kz items. I am in need of a orig 1976 kz 900 airbox, Also ltd handlebar mounted turn signals.

    2 comments

    Kz1000p — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Built this bike for a frien, in 2011 payed $8k for it he wants to sell it so im doit for him. 1982 KZ100 police engine , compression 140-150psi on each cylinder, newer plugs and wires (ngk). Engine fire right up (unless its cold like 6am az winter cold ). Runs strong. Has small oil leak not sure where it comes from ( could be tach. cable), has new tach. New front break pads and fluid. Forks are 2002 KTM, new Michelin Tires. Frame is a modified 2004 vstar (single backbone, stretched and raked , down tubs lengthened all 1.25"x 1/8" tube) titled as 1976 CB750. Custom seat (leather by Haifley Brothers). Cutom coffin tank. Tank and femder painted to look like wood. Bikes name ElWood. Custom headlight, super loud horn in key of E. New battery 2yr warranty. New stator and gasket. Newer clutch friction plates. New kickstand spring. I have not done any major work on this engine though i did inspect the valves and cams when i built the bike and the look pretty good then and were woth in spec. My friend is asking 5k or best offer. If you have anyore questions please ask if you have and offer please let me know what it is thanks

    0 comments

    For 50 00 you will get a custom wire harness tailored to your delay box jumper... — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    For $50.00 you will get a custom wire harness tailored to your delay box, jumper plug for no box racing, and wiring diagram.

    After you order I will E-Mail or Facebook message you for your delay box and wiring specifications.

    You can also purchase a Digital Delay Little Wizard delay box with the harness installed.

    All harnesses are built to order, orders will ship in 2-3 business days from time of order.

    Please message me with any questions.

    https://liguori-drag-racing.my shopify.com/collections/delay- boxes

    1 comments

    1982 kz1000 chop — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Built this bike for a frien, in 2011 payed $8k for it he wants to sell it so im doit for him. 1982 KZ100 police engine , compression 140-150psi on each cylinder, newer plugs and wires (ngk). Engine fire right up (unless its cold like 6am az winter cold ). Runs strong. Has small oil leak not sure where it comes from ( could be tach. cable), has new tach. New front break pads and fluid. Forks are 2002 KTM, new Michelin Tires. Frame is a modified 2004 vstar (single backbone, stretched and raked , down tubs lengthened all 1.25"x 1/8" tube) titled as 1976 CB750. Custom seat (leather by Haifley Brothers). Cutom coffin tank. Tank and femder painted to look like wood. Bikes name ElWood. Custom headlight, super loud horn in key of E. New battery 2yr warranty. New stator and gasket. Newer clutch friction plates. New kickstand spring. I have not done any major work on this engine though i did inspect the valves and cams when i built the bike and the look pretty good then and were woth in spec. My friend is asking 5k or best offer. If you have anyore questions please ask if you have and offer please let me know what it is thanks Read Less

    4 comments

    Okay guys I screwed up I need your help I was checking the ring gap on all of... — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Okay guys, I screwed up. I need your help. I was checking the ring gap on all of my cylinders and broke the wiper ringg for one of the pistons. I am working on 1976 kz900 with a 1075 with 10.25-1 compression. I know someone out there has done the same thing I have done and has had to buy a brand new full set of rings. Does anyone have an extra wiper ring for a 1075 they would be willing to sell me so that I don't have to spend $100 for a whole set? Ring measures .046 thick. Pistons are MTC and brand new. I already called them they do not sell individual rings. I'm hoping someone can help me if so please let me know. If not I might just part this thing out and be done with it.

    5 comments

    Looking for an Atp turbo intake / manifold — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Hey guys, I'm after an Atp turbo intake for my 79 kz1 and wanted to see on the off chance if anyone had 1 available or would know where the best place to look for 1 was? I'm in New Zealand so makes it bloody hard to find bits from this end of the earth. Cheerz

    Looking for an Atp turbo intake / manifold

    FREE - Papamoa Beach, Bay of Plenty

    Hey guys, I'm after an Atp turbo intake for my 79 kz1 and wanted to see on the off chance if anyone had 1 available or would know where the best place to look for 1 was? I'm in New Zealand so makes it bloody hard to find bits from this end of the earth. Cheerz

    13 comments

    old school , Kaw S/C chassis

    My old super comp bike . two bodys , the orignal , for a 9" tire , a new one for the 10" tire , back rim is 9" . I set it up with a hyd. clutch , and line lock . the standard cable too , 530 sprockets on bike now , 630 sprockets goes with it . was a #1 plate holder in 1999 , Bill Hendrick's old bike . He spent $1200 to widen the ass end to fit the 10" tire , and then built a new bike . I ran it for 2 years , butten start 1500 on alki had fun with it . no world beater , but fun . over $3600 in parts , sitting since 2002 , she needs some TLC . ran straght and true . But my NITRO bike is more FUN !! Any questions ? Jerry "G"

    Willoughby Ohio 440-478-5590 I will deal .

    0 comments

    Kawasaki KZ parts — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    630 chain sprockets .[ 41T steel $10 ] .. [ 33T steel $10]...[ 37T aluminum $25 ]....[ 41T $25 ].... [ motor blockoff plate $25 ]...[.grips $15 ] ...[ seat. Needs some pan repair but usable $30 ] .front sprockets 15T [ with cone 1/4 offset $30 ]..[new 1/4 offset $25 ] . [ 2ea. oem $5 ] ... [900 tail $30 ]..[ 1000 tails $10 each .needs repairs ]

    . price + shipping

    11 comments

    3 over aluminum swing arm — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    kz900 aluminum swing arm 3 over stock with chain gaurd,,has air built in to it for air shifter.has some small scratches and one gouge on the side from a home made brake arm please look at pictures close.. ,i also have the air shifter that goes with it for $100 more $350+ $25 shipping.

    14 comments

    1978 kz1000 — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    I had this listed a few months back but I moved so here it is again, does not run, but it is complete, and I have a nice header and supertrapp for it. I want $1000 for it. Please if you are interested call or txt me and I will be more than happy to answer your questions. Located in south west Missouri. 262-220-8997.

    1978 kz1000

    FREE - Bolivar, Missouri

    I had this listed a few months back but I moved so here it is again, does not run, but it is complete, and I have a nice header and supertrapp for it. I want $1000 for it. Please if you are interested call or txt me and I will be more than happy to answer your questions. Located in south west Missouri. 262-220-8997.

    21 comments

    Dyna stuff — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Dyna 4000 pro dyna shift minder dyna 6 speed shift counter and dyna 3.0 ohm coils. Everything is in good working order.$250 obo Paypal only

    Dyna stuff

    $250 - Bluff City, TN (37618)

    Dyna 4000 pro dyna shift minder dyna 6 speed shift counter and dyna 3.0 ohm coils. Everything is in good working order.$250 obo Paypal only

    7 comments

    Koenig Engineering Lowboy Chassis, ProMod Great TG, 4.60 — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    RC Component wheels, 10 inch wide wheel on the rear. Tire is the 28/10.5-15

    World Wide Bearings ceramic bearings in front and rear wheels.

    Outboard bearing support bearing has also been replaced with a ceramic ball bearing purchased at local automotive store.

    3 1/2" offset sprocket

    Koenig Engineering Chassis update to removeable backbone. Was changed to accept the taller cylinder block to allow running a stroker crankshaft.

    Carbon Fiber wheel tub by Kenny's Composite

    Rpm Computer. Has 4 egt's, 4o2's, clutch sensor, output shaft sensor, nitrous pressure sensor, fuel pressure sensor, battery voltage.

    New in 2016: Nitrous Express nitrous solenoids (2) 1 used as safety, 1 used as control, Holley Blue fuel pump, Murray Big Tube header with (4) o2 bungs on each head pipe, Wiring was partially updated with Deutsch connectors.

    Schnitz box Pro Series II

    (4) Dyna coils set up for dual plug head

    (2) Lipo batteries with charger.

    This chassis would be a great Top Gas, 4.60 index bike. Everything is here. All you will need is your motor. Can provide time slips or videos.

    Best 1/4 mile e.t. 6.889 @191.27 mph. Best 1/8 mile 4.385. Best 1/8 mile mph 166.23.

    1 comments

    Not for sale — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Got the green light from cousin Joe bubb last night about to be a build happen in here boys we're going to start with two degrees of rake

    Not for sale

    FREE - Fort Wayne, IN (46808)

    Got the green light from cousin Joe bubb last night about to be a build happen in here boys we're going to start with two degrees of rake

    0 comments

    FBR Front end — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    FBR Front end 10 pounds

    Came off my KZ so the stem fits a kz neck but is universal the stem can be made for any bike.

    Top of forks to center of axle is 26 inches

    This front end is awesome and worked and rode great!!

    Will ship in the US

    Accept paypal

    2 comments

    4.60/ Top Gas Drag Bike — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    KZ based 1500 cc Kawasaki.

    Koenig chasis.

    Wheel base is 75"-79" with 50.5" crank to rear axle.

    1500cc engine with Robinson billet 5-speed auto trans. with billet shift drum.

    MTC slider clutch with quick access cover.

    J model / GPZ head.

    41mm titanium intake valves, 33mm stainless steel exhaust valves.

    Cam Motion cams. .507 lift intake and exhaust cams.

    MTC cylinder with MTC Pro-Mod pistons.

    Pearson crank.

    MKII cases.

    Murray step pipe exhaust with stainless steel megaphone.

    44mm Lectron carbs.

    RC Comp wheels- 17" front, 15" x 10" rear.

    Koenig front end.

    Koenig brake rotors and Grimeca calipers with Magura master cylinders.

    28" x 10.5" x 15" M/T rear slick.

    Original ZX7 Glasslite body.

    Aluminum wheelie bars.

    Pro Series II ignition box with Dyna coils and Dyna shift light with LED bulb upgrade.

    NOS system with NX pro mod solenoids, NOS fogger nozzles, and 5 lb. bottle.

    Holley Blue fuel pump.

    Runs on VP C16 fuel.

    A WEGO III is installed. Software to download is included.

    ARC dual voltage (12 vdc and 120 vac) bottle heater.

    Vanson engine diaper.

    Also included are axle blocks, brake stay, and second set of aluminum wheelie bars for 72"- 74" wheel base.

    Asking $12,000. Bike is sold turn-key only.

    This bike is ready to race!

    If you have any questions or need additional information I can be reached at 1-405-760-2123.

    I will return all calls. I DO NOT TEXT.

    Thanks for looking- Charlie Finch

    8 comments

    Various Motorcycle Parts — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    I have some various parts and chassis for sale.

    86 Suzuki GSXR 750 chassis (No title)

    88 Suzuki GSXR 1100 chassis (No title)

    97 Suzuki GSXR1100 rolling chassis

    Kawasaki KZ1000 motor

    2000 Yamaha R1 forks (Rebuilt with new fork oil and seals) Gold color forks

    I have other various parts so PM me or let me know what you need and I'll post pics of all parts ava5. All clean number frames just no paperwork. I have accumulated several projects and my schedule won't allow me to finish them.

    7 comments

    Need some help guys I bought a freshly honed cylinder and brand new MTC 1075... — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Need some help guys. I bought a freshly honed cylinder and brand new MTC 1075 piston and rings set off of a buddy that have never been run, only set up, and I need some help identifying the pistons so I know the compression ratio. The only markings are cast in the dome MTCI, or MTC1. I have checked all 4 pistons and there are no other markings. Can anyone help?

    16 comments

    BRAND NEW MTC KZ Slider — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Brand new MTC KZ slider never mounted in a bike fresh back from MTC.

    NO CORE

    It's ready to go in the bike and race!

    $950

    Plus shipping

    BRAND NEW MTC KZ Slider

    $1 - Dover, DE (19901)

    Brand new MTC KZ slider never mounted in a bike fresh back from MTC.

    NO CORE

    It's ready to go in the bike and race!

    $950

    Plus shipping

    5 comments

    KZ GPZ JMODEL PARTS — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    Durham Racing has any old Kaw parts you may need please give us a call for anything you are looking for!!! Parts parts parts and more parts

    KZ GPZ JMODEL PARTS

    $1 - Dover, DE (19901)

    Durham Racing has any old Kaw parts you may need please give us a call for anything you are looking for!!! Parts parts parts and more parts

    1 comments

    GPZ 1100 Trans Stock — KAWASAKI KZ900 1000 DRAGBIKE Swap Meet

    GPZ 1100 Trans Stock.

    We have 8 of these on the shelf.

    Will ship at buyers expense in the US

    $300.00

    Contact myself or Mike Durham 302-678-2564

    GPZ 1100 Trans Stock

    $1 - Dover, DE (19901)

    GPZ 1100 Trans Stock.

    We have 8 of these on the shelf.

    Will ship at buyers expense in the US

    $300.00

    Contact myself or Mike Durham 302-678-2564

    1 comments