Photos from Eric Hancock's post — Kawasaki KDX KX riders Nationwide

So after blowing the first led pod on my 94 kdx200, I went with a battery. Also decided I needed a toolbox. And no, when bottomed out it will come nowhere near the setup, I checked.....lol. forgot to take pics of the build, 3" pvc plus a black & decker 14.4v drill battery to power lights.

13 comments

03 Kdx 200 — Kawasaki KDX KX riders Nationwide

Full fmf with jets. V force 3. No title Newer chain and sprocket. Has lever guards not pictured. Need cash. Will not deliver. No rides without cash in hand please. Inbox me with any questions. Has kip rattle. Is clean as it will get. This is after a ride. I ride it daily no issues what so ever.

0 comments

Photos from Josh Howe's post — Kawasaki KDX KX riders Nationwide

Just got this 04 kdx220. Feels like its not hitting powerband as aggressive as it should be. Acts as if your hitting powerband on a cold 2 stroke. Claims to have 5 hours on rebuild and I checked compression which is 125psi, checked reeds, carb, spark plug, and they all look as should be. Any ideas?

12 comments

Question for the group — Kawasaki KDX KX riders Nationwide

Question for the group:

While riding last weekend, I had stalled & layed the bike down after avoiding my riding partner's wipe out. After that, I had no compression on the kick start, none at all, no resistance. I pushed the bike about 15 feet or so, then everything worked fine. Never happened before or since. Is this common? Any ideas on what's going on? Do I have a ticking time bomb on my hands? Any preventative maintenance that I can provide?

Thanks.

2000 KDX 220R

8 comments

Can anyone help me My 89 kdx isn t shifting right I ve checked the pawl drum... — Kawasaki KDX KX riders Nationwide

Can anyone help me? My 89 kdx isn't shifting right. I've checked the pawl, drum turns fine using a socket wrench and spinning the wheel, I can have the bike off, and do the same, this time using the shifter itself with no issues. BUT, it won't go into 6th gear, and running, it doesn't shift. I'm also looking for a headlight, and any input is greatly appreciated. On a side note, I read online of using diesel fuel to flush the tranny. Would this cause problems or not?

41 comments

Thought I d share 4 months ago I was at the hospital waiting for my daughter to... — Kawasaki KDX KX riders Nationwide

Thought I'd share, 4 months ago I was at the hospital waiting for my daughter to be born, and someone decided to steal my 88 kdx 200. Low and behold it just turned back up after laying deep in the woods for what seemed like the entire 4 months. Got it home, choked it, and it fires up first kick! Can't beat these old bikes! Now it's time to get it cleaned up and back to the trails!

7 comments

I don t care if folks share their other machines on here to show em off — Kawasaki KDX KX riders Nationwide

I don't care if folks share their other machines on here to show em off. We are a Kawasaki page but I'm sure alot of you guys own other bikes/atv's you are proud of. As long as Tech questions and the main subject matter of the page remains Kawasaki kdx and kx related then its ok by me. Anyone object?

After all, we are all men here...."showing off" is natural. Lol

13 comments

2003 kdx 200 — Kawasaki KDX KX riders Nationwide

No title. I ride it daily. Has full fmf. Gnarly woods. Has a couple dents. Jetted. Lowering links. Newer chain and sprockets 13/49. Full synthetic always used. 40:1. Has "kips rattle" could use gear fluid changed. Monster decal kit. Needs a rear fender. I would post pics but it's really muddy. Went trail riding yesterday. Inbox me. Have all receipts from previous owner. Was from North Carolina. Vin comes up clean.

0 comments

Photos from Mark Bzura's post — Kawasaki KDX KX riders Nationwide

ok guys..back to this steering stem..Heres what she looks like...new bearings and races installed. Phil Gasaway, we were talking about this weird fit a little bit yesterday..i cant see where i went wrong but i know this isnt right. that spanner looks wrong. Any ideas folks? I dont remember what it looked like before

16 comments

Hey guys I did steering bearings on my 03 ldx 220 a few weeks ago and have a... — Kawasaki KDX KX riders Nationwide

Hey guys..I did steering bearings on my 03 ldx 220 a few weeks ago and have a good ride on em. Seems that everything isnt quite a perfect fit..the races are in all the way and the bottom bearing is pressed all the way on but its as if the bearings are taller..the main stem bolt will only go part way down the threaded stem..I used an impact to tighten it and get it off...do u guys think I should try oem bearings instead. .that bolt should screw all the way down..the spacer is also in correctly. Any ideas?

4 comments

Well looks like it was even worse then I thought drained the oil and gas was... — Kawasaki KDX KX riders Nationwide

Well looks like it was even worse then I thought...drained the oil...and gas was in it..crank bearings...so I gotta rebuild it this winter...I bought a replacement bike..but you guys won't like it...it's a yz 360..big bore kit..it's won't post a picture due to repect of the team green..itsts nice but it's not my color lmao

8 comments