i need HELP .Were to connecet the Gear indicator i got GLpro.Were to connecedt it i have kawasaki Zx10r 2004-2005 and the GLpro is for the same bike.PLS HELP !
i need HELP Were to connecet the Gear indicator i got GLpro Were to connecedt...
ok i jsut call the dude taht sold me GLpro so he dont know how was conneced but he send me pic from the manuel.
he is comeing over to bring it to.Still he dont know how to conneced it he is an motorcycle dismantele shot :) seling parts
so it is an green one i think
For those who have been following this post, Miodrag Petrovski Baglamar just informed me via PM that he bought his bike in a bag, that all the wires are all messed up and chopped and changed, so now this makes the task of sorting out the problem that much more complicated.., but I never shy away from a challenge!
Thats the exact same picture that is on the diagram I posted on the K01.
Do ma a favour, take a photo of the thing you are trying to install.., focusing on the wires.
The dude know that the red wire was on the battery on + thats all he remamber when he remouve it
have 1 black 1 white and 1 green and from the black thare is an nother black stiking
Yes.., just as in the instructions I posted the red wire goes to the battery.
Red, green, white and black.., we dont need to worry about the red and black as they are + and -.., we just have to find a home for the green and white one.
What are douse 4 ppins taht stickes away and i can see the green one it is the only one taht is green
Its a green plug!...,
This is the gear positioning sensor for your bike.
how to conned it
strip the wires and connecet or ?
Red to battery, black to frame.., as for the white and green.., leave it with me.
Is there wires coming out of the top of the engine on the gears side that you could follow up to a plug?
4 going in 4 going out
the out one gose some were to the small star ( to the shifing rod )
What are the colours?
green black ,green brown, green gray , and green silver
all are green whit diferend shapes
green silver is more to the white so green white
i got it out of the mount brasket but i cant do it more it it tight and short :(
Oh ffs..., thats your gear sensor but I cant connect it with the wires supplied, are you positive its a K01?
Its no big deal adding wires to extend it.
the one i have NO ! the dude sayed he got it ot from the same kawasaki but i dont bealive him much.he gets brokein bikes and sell them for parts
Lord give me strength :-p ..., you have one with a red, black, green and white wire.., but the K01 says different.
let me see.
the 4 of the other side taht sticks ont from the gree plug are : Green red , Light green , green and black
thare we go
Right.., we have the green with red stripe and the black.., the red goes to the battery.., but the wires on your thing are red, black, green and white.., no mention of a white wire for the K01.
What I suggest is to go back to your mate and ask him if he remembers how he removed it and from where, but because your wires are all over the place he may not be able to remember.., I am now away to cut my wrists :-)
Thank you for trying my m8.You were helpful !
Not even sure if that is a K01 you have.., good luck mate :-D
i dint pay it yet tho the deal is if it works i pay :)
In a bag?
Phil Hopkins , In bits.
Ah that makes more sense